CALL US1-425-333-7668
Login

MicroCloud

Server Solutions

24/12/8 Modular UP Server Nodes in 3U

The Supermicro MicroCloud modular server system provides the high density, performance, efficiency and cost effectiveness required for today's demanding server deployments. The 24/12/8 modular server nodes are conveniently integrated into a compact 3U chassis that is less than 30 inches deep, saving over 76% of rack space when compared to traditional 1U servers. The cable-less, hot-pluggable server nodes operate independently. Each node can provide up to 128GB of memory, one PCI-E 3.0 x8 expansion slot for low-profile add-on card, and 2x 3.5", or 4x 2.5" HDDs with optional kit.

view config...
24 MODULAR UP SERVER NODES IN 3U

Conveniently integrated into a compact 3U chassis that is less than 30 inches deep, saving over 76% of rack space when compared to traditional 1U servers. The cable-less, hot-pluggable server nodes operate independently.

INDUSTRY-LEADING DENSITY AND PERFORMANCE

Each node supports up to 32GB ofmemory, one PCI-E 3.0 x8 expansion slot for low-profile add-on card, and 2x 2.5" SATA3 HDDs or 4x 2.5" Slim SSDs (with optional kit) per node. Supports Intel Xeon E3-1200v3 or Intel® Atom™ C27520.

view config...
12 MODULAR UP SERVER NODES IN 3U

Conveniently integrated into a compact 3U chassis that is less than 30 inches deep, saving over 76% of rack space when compared to traditional 1U servers. The cable-less, hot-pluggable server nodes operate independently.

INDUSTRY-LEADING DENSITY AND PERFORMANCE

Each node supports up to 32GB of memory, one PCI-E 3.0 x8 expansion slot for low-profile add-on card, and 2x 3.5" SATA HDDs per node. Supports Intel® Xeon™ E3-1200v3 or AMD Opteron™ 3300 Series.

view config...
8 MODULAR UP SERVER NODES IN 3U

Conveniently integrated into a compact 3U chassis that is less than 30 inches deep, saving over 76% of rack space when compared to traditional 1U servers. The cable-less, hot-pluggable server nodes operate independently.

INDUSTRY-LEADING DENSITY AND PERFORMANCE

Each node supports up to 128GB of memory, one PCI-E 3.0 x8 expansion slot for low-profile add-on card, and 2x 3.5" SATA HDDs per node. Supports Intel® Xeon E3-1200v3 or E5-2600v2.

view config...

SuperBlade

Server Solutions

The innovative SuperBlade® offers enhanced system computing density leveraged from years of rackmount server design experience. Applying Supermicro's application-optimized engineering philosophy, each SuperBlade® module delivers true server functionality including up to four processors (in select models), optional InfiniBand mezzanine HCA, and supports either SATA or SAS hard drives.

view config...

Supermicro TwinBlade Servers


Supermicro greenest, and most energy efficient TwinBlade supports up to 120 DP servers with 240 Intel® Xeon® E5-2600 v4/v3 family processors per 42U rack. Power with Platinum Level, 3000W/2500W N+1 or N+N redundancy. Networking options include up to two FDR 56G InfiniBandswitches, two 1/10GbE or 10GbE switches, and/or a 1GbE pass-through module to support highest bandwidth and demanding application. Onboard IPMI 2.0 with KVM over IP and remote Virtual Media over LAN enables ease of management and control.

view config...

Supermicro DatacenterBlade Servers


NVMe DatacenterBlade® (SBI-7428R-C3N/T3N series) is perfect for data center and HPC applications with performance & density optimized to achieve 3696 processing cores per 42U standard rack. This powerful SuperBlade® features 100-240VAC, ultra high-efficiency (94%+), N+1 redundant power supplies, along with industry-leading density, performance/watt and price/performance.

view config...

Supermicro OfficeBlade Servers


The OfficeBlade system is a blade and enclosure optimized for small-medium business and personal HPC applications. With acoustically enhanced thermal and cooling technologies, the OfficeBlade system can operate at or below 50dB with 10 DP server blades. The OfficeBlade system is best used with Supermicros CSE-RACK1U mini-rack cabinet.

view config...

Supermicro SuperBlade Enclosure


Space Optimization

Housed within a 19" industry-standard rack, SuperBlade® servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.

Up to 10 TwinBlade (20 nodes) can be installed in a 7U chassis. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the SuperBlade provides more than 50% density savings with 120 nodes and 24 switches in a 42U rack.


Cable Reduction

The SuperBlade® server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.

Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.

view config...

Twin Solutions

Twin Innovation

Supermicro's patented Twin Architecture with up to 16 DIMMs per node for Highest Performance is the foundation of the most advanced server platforms in HPC/Data Center, Cloud Computing and Enterprise IT applications. These high performance, high density systems feature optimum airflow for energy efficient cooling, easy maintenance and high availability with hot-swappable nodes and redundant power supply modules. These systems also feature the latest CPU and interconnect technologies for maximum processing performance and data throughput.

view config...

Supermicro FatTwin Servers

Best TCO with Highest Performance-per-Watt/per-Dollar

The Supermicro FatTwin™ is a high-density 8/4/2 hot-plug node SuperServer® system available with a variety of memory capacities, HDD technologies, PCI alternatives, networking capabilities, and GPU support options. The FatTwin™ supports up to: 2TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz in 16 DIMM slots, 1 PCI-E 3.0 x16 and 1 PCI-E 3.0 x8 Micro LP card , 8 ports of LSI® 3008 SAS 3.0 (12Gbps) with Software RAID, 10 ports of SATA 3.0 (6Gbps) with Intel® C612 controller, dual 10GBase-T or dual Gigabit Ethernet ports, redundant Titanium Level (96%) Digital power supplies, integrated IPMI 2.0 with KVM over dedicated LAN, and dual Intel® Xeon® processor E5-2600 v4 product families up to 22 cores and 145W TDP.

The Supermicro FatTwin™ represents a revolution in Green Computing designed to support customers' critical applications and also reduce Data Center TCO to help preserve the environment. The FatTwin™ extends the compute and storage capabilities of Supermicro's existing Twin SuperServer® systems to achieve increased performance and power efficiency. Due to its shared components the FatTwin™ improves cost-effectiveness and reliability, while its modular architecture makes it flexible to configure and easy to maintain.

view config...

Supermicro 2U Twin Pro Servers


The Supermicro TwinPro™ Solution architecture builds on Supermicro's proven Twin technology to provide the greatest and highest throughput storage, networking, I/O, memory, and processing capabilities in 2U, allowing customers to further optimize Supermicro solutions to solve their most challenging IT requirements.


The Supermicro 2U TwinPro™ and 2U TwinPro²&supTM provide up to 2TB of DDR4 up to 2400MHz 3DS LRDIMM memory in 16 DIMM slots; PCI-E 3.0 x16, PCI-E 3.0 x8 LP (2U TwinPro™), and "0 slot" flexible rear expansion for add-on card solutions such as PCI-E SSD, dual 10GbE with SFP+, or GPU/Xeon Phi; 10GBase-T, InfiniBand, or Gigabit Ethernet networking options; up to 4 NVMe and 8 SAS3 (12Gbps) 2.5" hot-swap HDDs per node; co-processor support (2U TwinPro™); IPMI 2.0 + KVM with dedicated LAN; SATA DOM power connector; TPM 1.2 header; and redundant Titanium Level power supplies.

view config...

Supermicro 2U Twin² Servers


The 2U Twin2® extends Supermicro's innovative Twin architecture with hot-swappable compute nodes in space-efficient form factors to facilitate ease of maintenance, reduce/eliminate down time, while saving power and space by sharing the same chassis and power supplies. The 2U Twin2® model is optimized for space efficiency and performance-per-watt, featuring four hot-swappable 1U compute nodes in a 2U form factor, each with up to six hot-swap 2.5" SAS2/SATA3 drive bays for exceptional storage capacity. The 2U Twin2® also offers one x16 native PCI-Express 3.0 slot for highest non-blocking I/O bandwidth, 8 DIMM slots per node for up to 1TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz memory, onboard Gigabit Ethernet or Mellanox® ConnectX3 single-port 56Gbps InfiniBand to provide greatest networking connectivity, and redundant 1600-watt Titanium Level (96%+) power supplies for greatest efficiency.


The 2U Twin2® is designed to further satisfy the ever-increasing efficiency, density, and low-TCO demands of today's High Performance Computing (HPC) clusters, Data Center Web Server and Virtualization, Cloud, and Hyperscale environments.

view config...

Supermicro 2U Twin Servers


The 2U Twin™ extends Supermicro's innovative Twin architecture with hot-swappable devices in space-efficient form factors to facilitate ease of maintenance, reduce/eliminate down time, while saving power and space by sharing the same chassis and power supplies. The 2U Twin™ model features two hot-swappable compute nodes in a 2U form factor to provide an industry leading six hot-swap 3.5" SAS2/SATA3 drive bays for greatest storage capacity per 1U compute node. The 2U Twin also offers 3 PCI-E 3.0 x8 slots (2 FHHL and 1 LP) for highest I/O performance, redundant 1280-watt Platinum Level (95% efficiency) power supplies for maximum power efficiency and availability, 8 DIMM slots per node for up to 1TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz memory, and dual onboard Gigabit Ethernet LAN. With a depth of only 28.5", the Supermicro 2U Twin is an exceptionally efficient and affordable alternative for a wide range of applications in Data Center, Cloud, and Hyperscale environments.

view config...

Supermicro 1U Twin Servers


The 1U Twin is an innovative 1U rackmount system supporting 2 compute nodes that is designed to increase processing density while reducing cost, energy and space when compared to traditional 1U rackmount servers. The 1U Twin supports up to four hot-swap 2.5" or two hot-swap 3.5" SATA3 drive bays per node for exceptional storage capacity. It also offers one x16 native PCI-Express 3.0 slot for highest non-blocking I/O bandwidth, 8 DIMM slots per node for up to 1TB ECC 3DS LRDIMM or RDIMM DDR4-2400MHz memory, onboard Gigabit Ethernet or Mellanox® ConnectX3 single-port 56Gbps InfiniBand to provide greatest networking connectivity, and redundant 1000-watt Titanium Level (96%+) power supplies for greatest efficiency.


The 1U Twin is designed to further satisfy the ever-increasing efficiency, density, and low-TCO demands of today's High Performance Computing (HPC) clusters, Data Center Front End Server and Virtualization, Cloud, and Hyperscale environments.

view config...

SuperServers

Server Solutions

These benefits combined with an excellent track record have earned Supermicro a reputation as a true leader in the high-end PC/server industry. After all, Supermicro provides the most outstanding product line in the industry, ranging from single Pentium 4 and dual Xeon to quad Xeon MP and dual Itanium systems. Their proven high level of quality and performance has made SuperServers the platform of choice for supercomputer clusters and enterprise databases as well as business-critical, front-end server applications.

view config...

Supermicro 4U Rackmount Servers


Designed for optimal performance, 4U SuperServer support the QPI (8.0 GT/s) format Xeon® Family processors in a high-density 4U form-factor. The 4U SuperServer have excellent expansion capability and feature set.

view config...

Supermicro 3U Rackmount Servers


Designed for optimal performance, 3U SuperServers support the QPI (9.6GT/s) format Xeon® processor family in 3U form-factor. These SuperServers are ideal for network infrastructure, front-end enterprise, and minimal-downtime cluster server systems.

view config...

Supermicro 2U Rackmount Servers


Designed to deliver solid performance and mission-critical reliability for customer applications, these Supermicro 2U rack servers support the latest Xeon® family and deliver additional levels of performance, power-efficiency and reliability.

view config...

Supermicro 1U Rackmount Servers


Designed for optimal performance, the 1U SuperServers support the QPI (8.0GT/s) format Xeon® in a high-density 1U form-factor. These SuperServers are ideal for network infrastructure, front-end enterprise, and minimal-downtime cluster server systems.

view config...

Supermicro Pedestal/Tower Servers


Designed for optimal performance, the Pedestal/Tower SuperServer series support the QPI (9.6 GT/s) format Xeon® Family processors in a high-density 4U/Tower form-factor. The Tower SuperServer have excellent expansion capability and feature set.

view config...

GPU SuperServers

Server Solutions

Supermicro's GPU SuperServers establish the company as the true global leader in High-Performance, Enterprise-Class SuperComputing and GreenIT. Generating massively parallel processing power and unrivaled networking flexibility with PCI-E 2.0 expansion slots, Gigabit Ethernet, and QDR/DDR InfiniBand ports, these systems deliver the highest quality with extreme optimisation for the most computationally-intensive applications.

view config...

Supermicro GPU SuperServers


Supermicro's extensive range of High-Performance, Enterprise-Class Supercomputing GPU-Accelerated for Finance, Oil & Gas, Science, and Engineering. Supermicro extends its technology lead in the GPU computing space with this innovative GPU server architecture. Many options are available to select from including systems with or without the latest enterprise grade NVIDIA® GPUs integrated; 1U, 2U, 3U, or 4U form factor; and UP or DP CPUs.

view config...

Supermicro SuperBlade


GPU Accelerated High-Performance, Enterprise-Class SuperComputing


  • Up to 30 GPU Cards in 7U Enclosure with 10 DP nodes
  • 8 DDR3 DIMM (Up to 1600MHz)
  • On-board Intel i350 Dual Port 1GbE NIC
  • InfiniBand FDR/QDR, 10GbE or FCoE
  • On-board BMC for IPMI 2.0 support
  • One SATA DOM up to 128GB
  • GPU Direct Now Supports RDMA
view config...