CALL US1-425-333-7668
Login
APC AP8965 2G 8.6kW 208V Zero U Switched Rack Power Distribution Unit

APC AP8965 2G 8.6kW 208V Zero U Switched Rack Power Distribution Unit

Switched Rack PDU

Rack PDU 2G, SWITCHED, ZEROU, 8.6kW, 208V, (21) C13 & (3) C19

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

Availability: 3-7 Business Days

$1,340.99

  • Detail
  • Product Description
  • Feedback
SKU AP8965
Manufacturer No
Input Phase 3-Phase
Mounting Vertically
Input Voltage 208V
Input Plug NEMA L21-30P
Output Receptacles IEC320-C13, IEC320-C19
Outlet Quantity 24
Metered Yes
Switched Yes
Output nominal voltage 208V
Maximum Total Current Draw per Phase 30A
Output Connections (21) IEC 320 C13
(3) IEC 320 C19
Overload Protection Yes
Nominal Input Voltage(S) Supported 208V 3PH
Input Frequency 50/60 Hz
Maximum/Regulatory Derated Input Current 24A (North America)
Input Connections NEMA L21-30P
Input Cord Length (M) 1.83 meters
Number of Power Cords 1
Acceptable Input Voltage -
Maximum Line Current per phase 30A
Maximum Input Current per phase 30A
Load Capacity -
Net Weight 8.18 KG
Maximum Height 1829.00 mm
Maximum Width 56.00 mm
Maximum Depth 51.00 mm
Shipping Weight 10.32 KG
Shipping Height 2040.00 mm
Shipping Width 165.00 mm
Shipping Depth 124.00 mm
Color Black
Operating Environment -5 - 45 °C
Operating Relative Humidity 5 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -25 - 65 °C
Storage Relative Humidity 5 - 95%
Storage Elevation 0-15000 meters
Regulatory Approvals cUL Listed, FCC Part 15 Class A, ICES-003, UL Listed, VCCI Class A
Product Warranty Period 2 years repair or replace
RoHS/Others Compliant
Reach REACH: Contains No SVHCs
Battery Directive Compliant
Battery Notes Contains Lithium Battery

Switched Rack PDU

Switched Rack Power Distribution Units (PDUs) provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.


Giving you the control of your rack IT equipment

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.

 

Availability
 
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote Individual Outlet Control
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Power Delays
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load indicator LED
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Flash Upgradeable
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
 
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Agility

Rack-Mountable
Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
 
Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
 
Wide range of input and output connections
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip..

Write Your Own Review

You're reviewing: APC AP8965 2G 8.6kW 208V Zero U Switched Rack Power Distribution Unit

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
How do you rate this product?