CALL US1-425-333-7668

Supermicro 1027GR-TRF GPU/Xeon Phi Server

  • Configuration
  • Product Description
  • Feedback

* Required Fields

Super X9DRG-HF
CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
    (up to 130W TDP)
Note BIOS version 3.0 or above is required
Cache Up to 30MB
System Bus QPI up to 8 GT/s
GPU/Xeon Phi Support M2090, up to 130W CPU at 30°C
M2075, up to 130W CPU at 35°C
K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C
Xeon Phi, up to 130W CPU at 30°C
System Memory
Memory Capacity 8x 240-pin DDR3 DIMM sockets
Up to 256GB DDR3 ECC Registered memory (RDIMM)
Up to 48GB DDR3 ECC and non-ECC UDIMM
Memory Type 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5V, 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset Intel® C602 Chipset
SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics Matrox G200eW
Input / Output
SATA 2 SATA 3.0 ports (6Gbps)
2 SATA 2.0 ports (3Gbps)
LAN 2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 2 USB 2.0 ports
Video 1 VGA Connector
Keyboard/Mouse 1 PS/2 Keyboard/Mouse port
Serial Port 1 Serial header
Form Factor 1U Rackmount
Model CSE-118GQ-R1800B
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 31" (787mm)
Weight 48 lbs (21.8 kg)
Available Colors Black
Front Panel
Buttons Power On/Off button
System Reset button
LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
Expansion Slots
PCI-Express 3x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards)
1x PCI-E 3.0 x8 (in x16) low-profile slot
AOC Compatibility Matrix
Drive Bays
Hot-swap 4x 2.5" Hot-swap drive bays
System Cooling
Fans 10x counter-rotating fans with optimal fan speed control
Power Supply 
1800W (1+1) Redundant 1800W power supply with PMBus
AC Input
1000W Output @ 100-120V, 12-10A, 50-60Hz
1200W Output @ 120-140V, 12-10A, 50-60Hz
1800W Output @ 200-240V, 10-8.5A, 50-60Hz
DC Output 1000W: +12V/84A; +5Vsb/4A
1200W: +12V/100A; +5Vsb/4A
1800W: +12V/150A; +5Vsb/4A

Platinum Level

System BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
RTC (Real Time Clock) Wakeup
Operating Environment / Compliance
RoHS RoHS Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)


Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9DRG-HF
Super X9DRG-HF Motherboard
1U Black SC118GQ Chassis
Air Shroud MCP-310-11802-0N 1 Air Shroud for X9DRG used in SC118GQ-R1800B
Backplane BPN-SAS-118G-4 1 SAS-118G-4; supports 4X2.5" SATA HDD,
Cable 1 CBL-0157L-02 1 8 pin to 8 pin ribbon SGPIO cable with tube, 27cm, PBF
Cable 2 CBL-0207L 1 59CM SATA ROUND S-S PBF.26AWG
Cable 3 CBL-0227L 1 48CM SATA ROUND S-RA PBF.26AWG
Cable 4 CBL-0228L 2 55CM SATA ROUND S-RA PBF 26AWG
Cable 5 CBL-0296L 5 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Cable 6 CBL-0333L 3 6+2 pin to 8 pin GPU power extension from MB, 30cm. 18/20AWG
Cable 7 CBL-0460L 1 8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG
Riser Card RSC-R1UG-E16A-X9 1 RSC-R1UG-E16A-X9-O-P
Riser Card RSC-R1UG-E16AR-X9 1 A Right Hand Side Riser Card with PCI-E x16
Riser Card RSC-R1UG-E16B-X9 1 RSC-R1UG-E16B-X9-O-P
Riser Card RSC-R1UG-E16R-X9 1 A 1U Right Hand Side Riser Card with PCI-E x16
Heatsink / Retention SNK-P0047PS 1 1U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM
Heatsink / Retention SNK-P0047PSC 1 1U Passive Front CPU Heat Sink for X9DRG-HF 1U GPU Server
Power Supply PWS-1K81P-1R 2 1800W Platinum Redundant Single Output
Cable 8 CBL-0160L 2 NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
Fan 1 FAN-0141L4 10 40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan
Drive Tray(s) MCP-220-00047-0B 4 Black gen 3rd hot-swap 2.5inch HDD tray
Mounting Rails MCP-290-00054-0N 1 set Rail set, quick/quick, optional for 1U 17.2

Write Your Own Review

You're reviewing: Supermicro 1027GR-TRF GPU/Xeon Phi Server

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
How do you rate this product?