CALL US1-425-333-7668
Login

Supermicro 1U 813M UP Core I3 / E3 Xeon V3 CPU, 32GB RAM MAX, 4 3.5" Hot-Swap Disk Server

  • Configuration
  • Product Description
  • Feedback

* Required Fields

Motherboard


Super X10SLM-F  


Processor/Cache


CPU
  • Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
  • Socket H3 (LGA 1150)

 

System Memory


Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
   
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
   
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
   
Memory Voltage
  • 1.5 V
   
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

 

On-Board Devices


Chipset
  • Intel® C224 Express PCH
   
SATA
  • SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
  • SATA2 (3Gbps) w/ RAID 0, 1
   
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 BMC with 10/100/1000Mbps
   
Network Controllers
  • Intel® i217LM + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
   
VGA
  • Aspeed AST2400 BMC

 

Input / Output


Serial ATA
  • 4x SATA3 (6Gbps) ports
  • 2x SATA2 (3Gbps) ports
  • SATA DOM Power Connector
   
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
   
USB
  • 4x USB 3.0 ports (1 Type-A, 2+1 via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
   
VGA
  • 1x VGA port
   
Serial Port / Header
  • 1x Fast UART 16550 serial port
  • 1x internal header

 

PC Health Monitoring


Voltage
  • Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
   
FAN
  • Total of five 4-pin fan headers supporting up to 5 fans
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
   
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
   
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
   
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header

 

Chassis


Form Factor
  • 1U Rackmount
Model
  • CSE-813MTQ-350CB

 

Dimensions


Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 19.8" (503mm)
Weight
  • Gross Weight: 30.4 lbs (13.8 kg)
  • Net Weight: 17.6 lbs (8 kg)
Available Colors
  • Black

 

Front Panel


Buttons
  • Power On/Off button
  • System Reset button
   
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
   
Ports
  • 2x USB ports
  • 1x Serial COM Port

 

Expansion Slots


PCI-Express
  • 1x PCI-E 3.0 x8 (in x16) Full-height slot*

 

Drive Bays


Hot-swap
  • 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay
  • Slim optical drive (optional)

 

Backplane


SAS2/SATA3 HDD Backplane

(SAS support requires optional SAS controller)


System Cooling


Fans
  • 4x 4cm 12,500 RPM PWM fans
  • Optional fans to cool add-on cards

 

Power Supply


350W AC power supply w/ PFC
AC Voltage 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V 18 Amp
+5V standby 3 Amp
+12V 29 Amp
+3.3V 15 Amp
Certification Gold Certified

 

System BIOS


BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features

DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support

 

Management


Software

IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI

   
Power Configurations

ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

 

Operating Environment / Compliance


RoHS RoHS2 (2011/65/EU) Compliant
Environmental Spec.
  • Operating Temperature: 
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: 
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 
       5% to 95% (non-condensing)

 

Parts List - (Items Included)


 

Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10SLM-F 
 
CSE-813MTQ-350CB
1
 
1
Super X10SLM-F Motherboard
 
1U Chassis
Backplane BPN-SAS-815TQ 1 BPN-SAS-815TQ-O-P
Cable 1 CBL-0157L 1 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF
Cable 2 CBL-0186L 1 SET OF 4 SATA 56/45.5/35/23CM ROUND S-RA. 26AWG
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PCI-E x16 output
Heatsink / Retention SNK-P0046P 1 1U PASSIVE CPU HS FOR INTEL LGA1156
Power Supply PWS-351-1H 1 1U 350W MULTI OUTPUT 80PLUS GOLD PWS
Cable 3 CBL-0049L 1 Front ctrl cable 16 PIN TO 16 PIN, LF, Flat (L=54cm)
Fan 1 FAN-0065L4 4 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M
Drive Tray(s) MCP-220-00093-0B 4 Black 3.5
Mounting Rails CSE-PT52 1 set THIRD GENERATION GUIDE RAIL ASSY. Outer slides extendable length: 26" to 33.5"

Write Your Own Review

You're reviewing: Supermicro 1U 813M UP Core I3 / E3 Xeon V3 CPU, 32GB RAM MAX, 4 3.5" Hot-Swap Disk Server

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
How do you rate this product?

CONFIGURATED PRICE $0