| Motherboard |
| Super X9DRH-7F |
Processor/Cache
|
| CPU |
Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family |
| Note |
BIOS version 3.0 or above is required |
| Cache |
Up to 30MB |
| System Bus |
QPI up to 8 GT/s |
System Memory
|
| Memory Capacity |
16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC Registered memory (RDIMM)
Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type |
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage |
1.5V, 1.35V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset |
Intel® C602 Chipset |
| SATA |
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 |
| SAS |
SAS2 from LSI 2208
RAID 0, 1, 5, 6, 10, 50, 60 support |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers |
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics |
Matrox G200eW |
| Super I/O |
Nuvoton W83527HG (optional) |
Input / Output
|
| Serial ATA |
2x SATA 3.0 ports (6Gbps)
8x SATA 2.0 ports (3Gbps) |
| SAS |
8x SAS2 ports (6Gbps) |
| LAN |
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB |
4x Rear USB 2.0 ports
MB: 4x rear + 4x via header + 1x Type A |
| VGA |
1x VGA port |
| Serial Port |
2x Fast UART 16550 serial COM port (1 rear & 1 header) |
| Chassis |
| Form Factor |
3U Rackmount |
| Model |
CSE-835TQ-R920B |
| Dimensions |
| Height |
5.2" (132mm) |
| Width |
17.2" (437mm) |
| Depth |
25.5" (648mm) |
| Weight |
Gross: 74.8lbs (34kg) / Net: 48lbs (21.8kg) |
| Available Colors |
Black |
| Front Panel |
| Buttons |
Power On/Off button
System Reset button |
| LEDs |
Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED |
Expansion Slots
|
| PCI-Express |
6x PCI-E 3.0 x8
1x PCI-E 3.0 x16 |
Drive Bays
|
| Hot-swap |
8x 3.5" Hot-swap SAS/SATA HDD trays
SAS or enterprise SATA HDD only recommended |
| Peripheral Bays |
2x 5.25" Peripheral Drive Bay |
| Peripheral Drives |
| DVD-ROM |
Slim DVD-ROM drive |
| Backplane |
| 1x SAS2 / SATA backplane |
System Cooling
|
| Fans |
3x 8cm 7K RPM, Middle fans
2x 8cm 6.7K RPM, Rear Exhaust fan |
| Power Supply |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input
|
100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output |
4 Amp @ +5V standby
75 Amp @ +12V |
| Certification |
Platinum Level |
| System BIOS |
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
| Operating Environment / Compliance |
| RoHS |
RoHS Compliant |
| Environmental Spec. |
Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing) |