CALL US1-425-333-7668

Supermicro F627R3-F73 FatTwin Server

  • Configuration
  • Product Description
  • Feedback

* Required Fields

Super X9DRFF-7
CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
    (up to 135W TDP; 130W TDP up to 47°C *)
Note BIOS version 3.0 or above is required
Cache Up to 30MB
System Bus QPI up to 8 GT/s
System Memory (per node)
Memory Capacity 8x 240-pin DDR3 DIMM sockets
Up to 256GB DDR3 ECC Registered memory (RDIMM)
Up to 64GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5V, 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset Intel® C602 Chipset
AHCI SATA SATA2 (3Gbps) with RAID 0, 1, 5, 10
SATA3 (6Gbps) with RAID 0, 1
SAS SAS2 via LSI 2308
SW RAID 0, 1, 10 support
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® 82574L Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Matrox G200eW
Input / Output (per node)
AHCI SATA 2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
SAS 8x SAS 2.0 ports (6Gbps)
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 2.0 ports
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port
Form Factor 4U Rackmount
Model CSE-F424AF-R1K28B
Height 6.96" (177mm)
Width 17.63" (448mm)
Depth 29" (737mm)
Weight Net Weight: 105 lbs (47.63 kg)
Gross Weight: 150 lbs (68.04 kg)
Available Colors Black
Front Panel
Buttons Power On/Off button
System Reset button
LEDs Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED
Expansion Slots (per node)
PCI-Express 1 PCI-E 3.0 x16 (LP) via riser card
Drive Bays (per node)
Hot-swap 4x 3.5" Hot-swap SAS/SATA HDD trays
Fixed (optional) 4x 3.5" Fixed SAS/SATA HDD trays
2x 3.5" Fixed SATA HDD trays
1x SAS2 / SATA backplane
System Cooling (per node)
Fans 8x 8cm heavy duty fans with air shroud and PWM fan speed control
Power Supply 
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A

Platinum Level

System BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Operating Environment / Compliance
RoHS RoHS Compliant
Environmental Spec. Operating Temperature:
   10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)


Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9DRFF-7
Super X9DRFF-7 Motherboard
4U Chassis
Backplane BPN-SAS-F424-A4 4 4x 3.5
Cable 1 CBL-0157L-02 4 8 pin to 8 pin ribbon SGPIO cable with tube, 27cm, PBF
Cable 2 CBL-0473L 16 21cm 30AWG SATA S-S cable
Cable 3 CBL-0486L 4 2x2 to 2x2 15cm power cable HF. 18AWG
Riser Card RSC-R1UFF-E16R-O-P 4 RSC-R1UFF-E16R
Heatsink / Retention SNK-P0048P 8 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Square ILM
Power Supply PWS-1K28P-SQ 4 1U 1280W, redundant single output power supply
Mounting Rail MCP-290-41803-0N 1 Fat twin F418 / F424 Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF

Write Your Own Review

You're reviewing: Supermicro F627R3-F73 FatTwin Server

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
How do you rate this product?